CAT5E VS CAT6

CAT5E VS CAT6

Category 5

If you are using an old router, modem or Ethernet adapter, you can either type of CAT5 100BaseT (100 Mbps) and 10BaseT (10Mbs). If you are using inefficient bandwidth network cable. However, they replaced the cable UTP, and this is due to several factors. The fact is that today, you will find very little to cable CAT5.

Category 5e-

CAT5E

The part you will not see much difference between CAT5 and CAT5e. But from the inside, of course, there are some differences. This can, for example, CAT5E supports 1000BaseT ports and can offer 1000MBs. Thus, the cable will allow you to enjoy the extra speed can support a modern network. Those who are not yet in six categories will, of course, UTP.

Category 6

 CAT6

This type of cable. They offer better insulation of wires, the function. Cat6 cable to reduce or eliminate cross-talk is much better than last kabelya.Tip cable also strongly 250MHz frequency, if you compare it to 100 MHz within five years. Thus, it will allow you to enjoy a more reliable and faster data transfer. Of course, this is what people like today.

So in any CAT5 six types of relational solution, of course, in favor of the six cables. In fact, the dispute with six CAT5 cable has the advantage, said at the end of the six categories.

Five categories = If you do not intend to 100 Mbps
If you plan to run 1000 Mbps (1 Gbps super five categories =)
Six categories if you want to 1000 Mbps (1 Gbps) operation. Six categories is better if you're in the area, with lots of noise in the vicinity of overhead power lines, lighting, equipment, or moving long distance 1000 Mbps (Gigabit).
We recommend using Cat5e or Cat6 cable, at least in the wall
UTP cable is a big patch from patch panel to the switch or computer to the network
We rarely use CAT5 cable.
For most applications, CAT5E 350MHz network management is the best. They will work up to 1 Gigabit and costly Cat 6 cable.
"Next" installed Category 6 cable is enormous. Its purpose is to network exceeds 1000 Mbps (Gigabit).
Over five 100MHz detailed design, only 100 Mbps network, but the price is low.
Category 5e Category 6 will eventually prevail. Analyst predictions and independent polls indicate that 85 to 95% of the new units will be installed Category 6. In fact, Category 5e, Category 6 CAT5E VS CAT6 requirements are backward compatible connections and channels, which makes it very easy for customers to choose category 6 and supersede category 5e in their networks. Applications run Category 5e or Category 6.CAT5E VS CAT6
current application to 1 Gbit / s is actually within the category 5e cable. As streaming media applications such as video and multimedia, increasingly, the demands for rapid data growth and the creation of new applications that will benefit from the higher bandwidth of Category 6 That is exactly what happened in the early 90's, when more bandwidth of category 5 cabling compared to category three caused most LAN applications to choose new media, so simple, the cost of high-speed local area networks, such as 100BASE-TX . Note: The capacity is defined as the highest frequency of positive energy in the amount of ACR (attenuation crosstalk ratio) is defined by greater than zero.